Model SV100 scanner/verifier

The Model SV100 scanner/verifier by RJS provides both fixed position scanning and high-speed on-line ANSI method verification. This unique instrument can be used for many types of bar code scanning and/or verifying applications.

SV100 IS AN ON-LINE VERIFIER INCLUDING THE FULL ANSI METHOD
ANSI and Traditional print quality parameters are transmitted along with decoded data. The reported symbol quality parameters ensure the print method or complete bar code process is optimized. This is important for ISO 9000 corrective action procedures, label manufacturing and printing, tracking systems, ink jet applications and more.

SV100 IS A FIXED POSITION SCANNER WITH DIAGNOSTIC CAPABILITY

The SV100 can operate as a fixed position scanner. But, since it also provides diagnostic bar code quality information, it reduces system downtime due to poor scanning. It does this by isolating the source of the problem. Once the source of the problem is found, it can be corrected.

The diagnostic capability is also useful when installing the scanner or after a conveyor or printer maintenance cycle. The available print quality information gives an indication of first time read rates, optimal scanner alignment, optimal conveyor speed, optimal printer settings and adjustments. In short, what is needed to ensure proper set-up of a system.

EASY SETUP / FLEXIBLE INTERFACE

The SV100 uses its serial port to interface with RJS ScanVision PC based software for scanner setup while the scanner/verifier is off line and/or real time bar code quality analysis while the scanner/verifier is operating. The unit also incorporates Model SV download language for setup without RJS ScanVision.

Five user programmable hardware outputs are available via an I/O-Power port for logic operation such as No Read, Poor Quality, Good Quality or Good Read status. Two synchronization inputs are also available for robust No Read evaluations. Two user programmable LED's are available for status indications.

Serial communications are also user programmable to receive a sync signal or report any combination of decoded data, parameter analyses or Pass/Fail information required.

RJS MODEL SV100 SYSTEM DESCRIPTION and TECHNICAL DATA

Accessories and Options;

Universal Power Supply Unit, RJS ScanVision Software, Female DB-9 to Female DB-9 Communication Cable (6 ft. (1.8 M) length), Calibration Symbol, Mounting Stand, Rastering Scan Line, High Density Focus, Interface Kits for Zebra and Sato Printers (contact RJS for additional printer types), Special Unit for Scanning Bar Codes on Corrugate.

* Data and Quality Parameters Available;

Decoded Data, All Symbol Characters, Modulo Check Digit Analysis, Symbology Type, ANSI Method Overall Symbol Grade, ANSI Method Parameter Grades, (Reference Decode, Decodability, Modulation, Symbol Contrast, Rmin/Rmax, Defects, Min. Edge Contrast and Global Threshold), Average Bar Deviation, Ratio (if applicable), PCS, Element Reflectance (min. and max.), Quiet Zone Analysis, X Dimension, Inter-Character Gap (if applicable), No Read Flag, % decode, Partial Read Analysis, Pass/Fail Flag (programmable for any combination of analyses)
* Notes: 1. All reflectance parameters require calibration, fixed scanning distance and fixed angle of scan
2. X dimension requires fixed scanning distance

Symbologies;

USS Code 39, USS Code 128, USS Code 93, USS Codabar,
USS Interleaved 2 of 5, UPC / EAN including 2 and 5 digit supplemental codes
(Contact RJS for special symbology applications.)

Scanning Performance;

Minimum of 100 scan line analyses/second; 6" (152 mm) scan width, 4 codes across max.
Bar code density - X dimension 6.6 mil (.17 mm) min. to 40 mil (1 mm) max.
Depth of Field - varies with mode of operation

Operation Modes;

Sync (edge and envelope), Freescan and ScanVision off line modes can be enabled

Physical;

Package; 4.4" (112 mm) x 2.4" (61 mm) x 5.2" (132 mm)
Indications; 5 LED's - Power, Calibration, Read, 2 programmable LED's
Comm Port; DB-9 male, RS 232C, programmable baud rate up to 115200 baud
I/O-Power; DB-15 male, 5 programmable outputs, 2 sync inputs
+5VDC @ 1 amp required
Mounting; 2 sets of mounting holes on 2 different surfaces or a clamp for tightening to a 3/8" (9.5 mm) rod.

RJS Systems International, 10430 Pioneer Blvd. Unit 1, Santa Fe Springs, CA 90670. Tel: 562-944-0930; Fax: 562-944-0630.