Product/Service

Electrical Safety Tester

Source: QuadTech
The tester can perform AC Hipot tests, insulation resistance measurements, ground-bond testing, and true RMS line leakage simulation testing
The tester can perform AC Hipot tests from 100-5,000 V; DC Hipot tests from 100-6,000 V; insulation resistance measurements over the range of 100 kW to 50 GW; ground-bond testing to 30 A; and a true RMS line leakage simulation using the recommended human body model of UL1950. The Hipot testing functions cover a current range, 1µA to 40 mA AC and 0.1µA to 20 mA DC. Any combination of these five tests can be run in sequence with an overall go/nogo indication and any failed measurement results are clearly shown.

All units include a LCD digital display for setup parameters and test results, pass/fail output, front panel lockout with password protection, and storage of 50 test setups for easy startup. The unit offers both digital and analog displays of the stimulus parameter, voltage or current. For an automated production environment, remote control or datalogging, the tester comes standards with PLC and IEEE-488 interfaces; an optional RS-232 interface is also available.

QuadTech Inc., 100 Nickerson Rd., Marlborough, MA 01752. Phone: 508-485-3500; Fax: 508-485-0295.