AS-Interface Class 2 Power Supply
A UL Listed Class 2 power supply for networking sensors, actuators and other control equipment has been developed on an Actuator-Sensor-Interface (AS-Interface) industrial network
N/AListed Class 2 power supply for networking sensors, actuators and other control equipment has been developed on an Actuator-Sensor-Interface (AS-Interface) industrial network. The supply is limited to 100 W and meets fire standards per NEC Article 725, which simplifies and reduces installation costs by eliminating the need for conduit.
AS-Interface operates according to the master/slave principle, using a mechanically coded two-wire, unshielded cable both for control power and data transfer. The interface line can be up to 328 feet, supplying devices with input currents up to 0.2A at 24VDC. Longer cable lengths – up to 984 feet – can be achieved by using repeaters and/or extenders. Up to 31 nodes (slaves) can be operated from one cable.
The power supply has selectable voltages of 120 and 230V AC and is available with or without ground fault detection.
<%=company%>, 3333 Old Milton Pkwy., Alpharetta, GA 30005 Phone: 770-751-2000, Fax: 770-740-2534