Magnetic Shielding Kits
The magnetic shielding Lab Kit is highly effective in solving design problems of magnetic interference. (D.C. to 100 kilohertz). By adding CO-NETIC and NETIC layers until desired attenuation is achieved, minimum material requirements can be determined. This results in significant cost savings in the final design.
An important advantage of the "hands-on" shielding approach is that changes in a circuit layout, shield configuration, power levels and component orientation are easily evaluated. Each consideration is evaluated without reliance on theoretical formulas that are imprecise. The Lab Kit permits magnetic shields to be designed and modified until required performance is obtained. The prototype then serves as a model for production.
Lab Kit Contents
The Lab Kit provides a wide variety of CO-NETIC and NETIC alloys. The material included is Perfection Annealed and will not require re-annealing unless severe forming or heli-arc welding is performed.
- 1 pc. CO-NETIC AA Foil .002" x 4" x 15" / 0,051 x 101,6 x 381,0 mm
- 1 pc. CO-NETIC AA Foil .004" x 15" x 10" / 0,102 x 381,0 x 254,0 mm
- 1 pc. CO-NETIC AA Foil .010" x 15" x 10" / 0,254 x 381,0 x 254,0 mm
- 1 pc. CO-NETIC AA Alloy .025" x 15" x 10" / 0,635 x 381,0 x 254,0 mm
- 1 pc. CO-NETIC Braided Sleeving 1/2" I.D. x 1 FT. / 12,7 mm x 30,48 cm
- 2 pcs. NETIC S3-6 Foil .004" x 15" x 10" / 0,102 x 381,0 x 254,0 mm
- 1 pc. NETIC S3-6 Alloy .030" x 15" x 10" / 0,762 x 381,0 x 254,0 mm
- 1 rl. Double-faced Pressure Sensitive Tape
- 1 A.C. Magnetic Probe, Model EP-101A
- 1 Product Information Binder
Magnetic Shield Corporation, 740 North Thomas Road, Bensenville, IL 60106. Tel: 630-766-7800; Fax: 630-766-2813.