The EtherMOD range of thin servers enables the connection of any TTL serial device with an Ethernet network
SAN PeopleD range of thin servers enables the connection of any TTL serial device with an Ethernet network. SAN PeopleD is programmed with an IP address, Subnet Mask and Gateway Address compatible with the Ethernet network it is planned to use the device on.
When the server is running, it becomes "transparent," passing data to and from the serial device to the application. SAN PeopleD also contains a Web server. The server can thus be remotely fully configured using any commercial Web Browser. Parameters such as Serial Port Configuration, Ethernet interface and DNS configuration can be easily changed from anywhere in the world.
Customised applications through scripting can be uploaded onto SAN Peopled. Using FTP, client specific Web pages can be uploaded onto the server, to allow for total client applications.
SAN PeopleD also has the ability to manipulate the serial device it is providing connectivity for. A Web page can be browsed allowing custom commands to be sent to the serial device or data to be read from it. The device also comes with serial port redirector software. This software enables an application, not able to communicate with a TCP socket, running on a PC, to transparently redirect data addressed to a serial port, to the IP address of an EtherMOD on the network.
<%=company%>, Quantum Street, Technopark, Stellenbosch, 7600, South Africa, Phone: -27-21-880 1699, Fax: -27-21-880 1559