Product/Service

Electrical Safety Analyzer

Source: QuadTech
The Model 6200 Electrical Safety Analyzers is an efficient production tester for single-phase electrical products and small appliances
QuadTech200 Electrical Safety Analyzers is an efficient production tester for single-phase electrical products and small appliances. Electrical safety tests, including Hipot, insulation resistance, ground bond, line leakage and power consumption, can be performed in sequence and final pass/fail result indicated. Without changing the connection to the product, all tests can be performed automatically, in succession, on a variety of single-phase electrical products and small appliances.

The analyzer can perform AC Hipot tests from 50 to 5000 V, DC Hipot test from 50 to 6000 V, insulation resistance (IR) measurements over the range of 100 kW to 50 GW, ground bond testing to 30 A and line/earth leakage measurements from 0.1 µA to 9.999 mA. The current trip levels for both AC and DC Hipot testing functions are user programmable from 1 µA to 40 mA AC and 0.1 µA to 20 mA DC, suited for a selection of products over a range of leakage currents.

Up to 50 unique sets of test conditions and limits can be stored in instrument memory for later recall. All test provide the ability to program both high and low limits for the measured parameter, a go/nogo decision is based on these limits and any failed measurements results indicated. The device also offers a password-protected front panel lockout to prevent an operate from inadvertently alerting test conditions.

<%=company%>, 5 Clock Tower Place, 210 East, Maynard, MA 01754. Phone: 978-461-2100; Fax: 978-461-4295.