Product/Service

Two 56 Series Inline handheld nutrunners. Tool on top has triple stage gearing for the higher torque (65 and 75 Nm) models. Tool on bottom has double stage gearing for 5 through 45 Nm models. All handheld models have a throttle lever for easy operation.

Tools shown at left are the P-L models with optional mounting plate (substitute a P for the R in the Part No. list below); R-L versions of the tools come with the reaction bar, below, instead of the plate.

The tech-motive tool 56 Series fastening tools are among AAG's "Intelligent Series " nutrunners -- that is, they have an internal microprocessor known as the Intelligent Tool Interface (ITI) module which makes setup and calibration automatic upon connection to a CS4000 or CS5000 Controller. The inline and pistol models range from 5 to 75 Nm; the right angle models range from 7 to 150 Nm. crowfoot, tubenut, and offset models are also available.

Advanced Assembly Group, 2889 Bond Street, Rochester, MI 48309-3515. Tel: 248-852-3500; Fax: 248-844-0844.

Free Plant Automation.com Newsletter